Since your installation is only on one network, it is not necessary to allocate a No. network to the NIC.
If you have multiple network cards (Ethernet, Controlle-Link network series ... etc) you should use CX-Integrator (or CX-Net) to assign No to the various networks involved. Therefore, the exchanges will include a No. network source and a No. destination network.
If you have multiple network cards (Ethernet, Controlle-Link network series ... etc) you should use CX-Integrator (or CX-Net) to assign No to the various networks involved. Therefore, the exchanges will include a No. network source and a No. destination network.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article