"CX-ConfiguratorFDT" supports all DTMs that have passed Certification testing"
The FDT Group provides interoperability workshops and a strict Test and Certification system to ensure vendors DTMs are certified. See http://www.fdtgroup.org/en/certification-its-benefits.html for more details. As of January 2010, there are over 106 certified DTMs supporting over 1,100 device types.
The most up to date list can be found at http://www.fdtgroup.org/en/certified-devices.html
Known DTM problems:
The FDT Group provides interoperability workshops and a strict Test and Certification system to ensure vendors DTMs are certified. See http://www.fdtgroup.org/en/certification-its-benefits.html for more details. As of January 2010, there are over 106 certified DTMs supporting over 1,100 device types.
The most up to date list can be found at http://www.fdtgroup.org/en/certified-devices.html
Known DTM problems:
|
Vendor |
Model |
DTM version |
Comment |
|
Turck |
BL20 |
1.0.0 (2007-06-12) |
Does not support ProfiBus connection for configuration. Use GSD file and Service port with dedicated cable. |
|
Phoenix Contact |
FLS (SensorHub) |
1.0.1.2 |
Does not provide any cyclic configuration so cannot share any data to PLC. Use GSD file to configure and select only "I/O 6 byte IO-Link-Master". |
| Vacon |
Option Card OPT-CD |
10530 V001 | Uses submodules. Contact vendor for update using a single module |
 |
Note: The Omron PROFINET IO Controller DTM does not support submodules so cannot be used with DTMs that implement device functionality in any submodule. |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article