Introduction
An example for CJ1M hardware.
Please review the attachments listed below.
| Skalier.cxp | Operand 2 for parameters required for SCL to 4 words Parameter is an array variable, array element size is 4. |
| Skalier.opt | |
| SCL_Real_mit_APR.cxp | Scaling with APR in FBs |
| Skalier_FB.cxp | Scaling examples with FB: INT to BCD values, INT-values, values with REAL ST programmed. |
| SCL_KOP.cxf | |
| SCL_INT.cxf | |
| SCL_REAL.cxf | |
| FB3_right.cxp | Scaling with FB, APR-command for 5 X, Y REAL-values, ie Array of 10 REAL values |
| APR_Float.opt | A sample program for 12 bases, real-values. They are arrays (tables with consecutive addresses). The corresponding symbols can be found at the local symbols for "APR_Program". X-values must be entered in ascending order, X [0], X [1] ... X [12]. Corresponding Y values Y [0], Y [1] ... Y [12]. Addresses can be changed most easily with the automatic address assignment, if necessary. This is based on the latest version of CX-Programmer with which arrays may be used. Otherwise, rewrite the symbols so that the addresses stay in the correct order. |
| APR_Float.cxp |
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article